MTS Street coilovers

Varenr: MTSGWBM04 / Produkt-ID: 100035892

MTS coilovers, leveres med annerkjente Eibach Fjærer


MakeBMW
Model5 Series / E39 Sedan
TypeE39
Engine520i / 523i / 525i / 528i / 530i / 535i / 540i / M5 / 520d / 525td / 525d / 525tds / 530d
Year11/95 - 06/03

TECH SPECS:

Series:street
Max. Axle Load FA:1105 kg
Max. Axle Load RA:1225 kg
Lowering FA:20 - 70 mm
Lowering RA:30 - 120 mm
TUV Certificate:yes
Download instruction:Download instruction
Download installation manual:Download installation manual
Download TUV Certificate:Download TUV Certificate


Passer:
BMW E39 Sedan ⇒
5 699,-

2 - Front and rear axle height adjustable (threaded shock absorber housing).
8 - Not for 4x4.
9 - Only for vehicles without NIVO / OEM pneumatic suspension.
12 - Only for vehicles without EDC.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
34 - 

Vehicles equipped with EDC and / or V8 engines will need additional OE parts. FRONT AXLE: dome bearing (BMW part: 31331091709), washer (BMW part: 31331116983), sealing washer (BMW part: 31331110196). REAR AXLE: supporting bearing (BMW part: 33521091710), supporting pot (BMW part: 33521090282), washer (BMW part: 33521092986), dust cover (BMW part: 31331137932), bumpstop (BMW part: 33531091031).


Coilover Kit fra MTS Technik.
Galvaniserte demperhus med pulverlakkerte fjærer fra Eibach.
Moderne demperteknologi og et stort utvalg av modeller.

Noen kit leveres med justerbare camberplater.
Ikke alle kit har TUV.

2 years warranty High quality confirmed by a 2-year warranty without a mileage limit.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.